October 22, 2020
TDK Corporation recently announced the introduction of the 15 to 20W PXG-M and 30W PXD-M30 board mount DC-DC converter series. With 4:1 input ranges of 9 to 36Vdc and 18 to 75Vdc, the two series are certified to IEC 60601-1 (medical) and IEC 62368-1 (ICT – Information and Communication Technology equipment). The input to output isolation is 5,000Vac allowing them to be used in multiple medical and industrial applications.
The PXG-M and PXD-M30 series have industry standard package sizes, with overall dimensions of 40.6 x 25.4 x 10.2 mm (1.6 x 1 x 0.4”) and 50.8 x 25.4 x 10.2 mm (2 x 1 x 0.4”) respectively. 5V, 12V, 15V and 24V single and +/-5V, +/-12V and +/-15V dual outputs are available in all three power levels. The single output models have an output adjustment function using a trim pin.
The units will operate with convection cooling in ambient temperatures of -40°C to +105°C. Derating at high temperatures may be required, which can be minimized with the use of external airflow. Over-current, over-voltage and over-temperature protection is standard. Off-load input current consumption is just 12mA or less, allowing battery powered equipment to remain functional longer during periods of non-operation. Positive or negative logic remote on-off is optional.
The two series have an input to output isolation of 5,000Vac (2 x MOPPs) and less than 2.5μA touch current. Safety certification includes IEC/EN 60601-1, ANSI/AAMI ES 60601-1 and IEC/EN/UL/CSA 62368-1 with CE marking for the Low Voltage and RoHS Directives. No external EMI filtering is required for compliance to EN 55011-A, EN 55032-A.
• Battery Powered Equipment
Main Features and Benefits
• Wide 4:1 input ranges to support either 12V/24V or 24V/48V system voltages
• Compact industry package sizes, reducing board area
• Certification to IEC 60601-1 and IEC 62368-1 for medical and industrial applications
• 2 x MOPP isolation for use in medical applications
• Low no-load power consumption to extend battery powered equipment operation
TDK InvenSense’s barometric pressure sensors use an innovative capacitive MEMS architecture to deliver lower power consumption and lower noise than competing technologies. The SmartPressure products can measure height change as small as 5 cm, less than the height of a...
SFC5500 mass flow controller series represent the culmination of Sensirion’s excellent 20-year track record in precision control of gas flow. The sensor is based on the microthermal measurement principle and makes use of Sensirion’s proven CMOSens® MEMS Technology....
The TouchChip® TCET module is compact, cost effective and easy to integrate. The on-board processor is used for capture and match, delivering fast and accurate results. It can store up to approximately 100 user templates and supports USB, SPI or UART interfaces. Power...
Stay Up to Date With The Latest News & Updates
Join Our Newsletter
Join our monthly newsletter for the latest updates in the electronics industry