August 22, 2019
Thingy:91™ Multisensor Prototyping Kit
The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make is highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all.
- Battery-operated prototyping platform for the nRf9160 SiP
- 700MHz to 900MHz + 1710MHz to 2200MHz LTE band support
- CE, FCC certifications
- nRF52840 multiprotocol system on a chip (SoC)
- LTE-M/NB-IoT/GPS antennas
- Nano/4FF SIM card slot
- User-programmable button and RGB LEDs
- Environmental sensor for temperature, humidity, air quality, and air pressure
- Color and light sensor
- Low-power accelerometer and high-g accelerometer
- 4 x NMOS transistors for external DC motors or LEDs
- Rechargeable Li-Po battery with 1440mAh capacity.
Assett Tracker Application On-Board
The Nordic Thingy:91 comes with a pre-loaded asset-tracking application that makes use of many of the on-kit sensors in addition to LTE-M and GPS which works from device to the cloud to provide users with a working out-of-the-box asset tracking and monitoring experience when they receive the Thingy:91. the asset tracker application is richly featured for this usecase, however Nordic Thingy:91 can be programmed with any dedicated application of your choice.
State-of-the-art Security with Arm Trustzone
Security is critically important to IoT. The nRF9160 takes the latest addition to Cortex-M architectures by using Arm TrustZone for secure boot and secure execution within the device. The technology has been the mainstay of secure operation in Cortex-A devices and is typically used to build secure operation in smartphones and tablets.
Based around nRF9160 SiP for LTE-M & NB-IoT
Built around the nRF9160 system-in-Package (SiP), nRF9160 has a separate application/radio modem architecture. It incorporates the latest Arm Cortex-M33 as a dedicated application processor. The dedicated radio system can support both LTE-M and NB-IoT technologies. The radio also supports GPS for precise positioning in your applications. The nRF9160 SiP integrates a full front-end RF system together with a complete power management system.
Develop Cellular IoT and Bluetooth Hybrid Applications
Nordic Thingy:91 has Nordic’s flagship multiprotocol SoC for short-range application, the nRF52840. The nRF52840 supports multiprotocol performance with a broad range of protocols including Bluetooth 5 and NFC. Short-range wireless has some very exciting possibilities when used in conjunction with cellular IoT technology and Nordic Thingy:91 enables you to explore these possibilities.
Broad Selection of Sensors and Features On-Board
The Nordic Thingy:91 has is packed with sensors to offer a broad range of development possibilities.
The nPM1100 is a dedicated power management IC (PMIC) with dual-mode configurable buck regulator and integrated battery charger. It is designed as a complementary component to Nordic’s nRF52® Series and nRF53® Series System-on-Chips (SoCs) to ensure reliable power...
Based on nRF5340 Nordic Semiconductor wireless SoC with two Arm® Cortex®-M33 processors and advanced feature set, the ISP2053 module is ideally suited for LE Audio, professional lighting, advanced wearables, industrial, medical, and other complex IoT applications. Low...
TDK InvenSense’s barometric pressure sensors use an innovative capacitive MEMS architecture to deliver lower power consumption and lower noise than competing technologies. The SmartPressure products can measure height change as small as 5 cm, less than the height of a...
Stay Up to Date With The Latest News & Updates
Join Our Newsletter
Join our monthly newsletter for the latest updates in the electronics industry